Johnson Controls YORK Tempo YLAA Series - Weight Distribution and Isolator Mounting Positions; General; Sample Isolator Location Drawing

JOHNSON CONTROLS
102
FORM 150.72-NM1 (1020)
Technical Data
WEIGHT DISTRIBUTION AND ISOLATOR MOUNTING POSITIONS
General
Weights of specic chiller models vary signicantly as
options are added. As a result, total weights, weights at
individual isolator positions, and actual isolator selection
at each position cannot be published due to the vast
number of possible combinations. This information will
be available when the specic chiller/ option selection
is made from the local Johnson Controls sales oce.
Be aware, weights will change with each option along
with possible isolator changes. Weights and isolators
may need to be recalculated when the option selections
are changed.
Whenever the isolator option is ordered, the isolators
will be shipped loose with the chiller. Packed with
the isolators and also in the control panel information
packet is a drawing and table specically for each chiller,
based on the option selection. The drawing and table
will be similar to the two samples shown below and on
the following page. The drawing will show the isolator
locations along with the weight in pounds and kilograms
at the specic location, isolator position, and location
measurements for each isolator.
Sample Isolator Location Drawing
Location
X Distance
inches (mm)
Y Distance
inches (mm)
Vendor Number
Operating Weight
lbs (kg)
R1 7.6 (193.0) 1.36 (34.5) ND-D / Yellow 1312 (595.1)
L1 7.6 (193.0) 86.86 (2206.2) ND-DS / Yellow 1843 (836.0)
R2 124.76 (3168.9) 1.36 (34.5) ND-D / Yellow 1280 (580.6)
L2 124.76 (3168.9) 86.86 (2206.2) ND-DS / Yellow 1793 (813.3)
SAMPLE PRINTOUT SUPPLIED IN THE ISOLATOR PACKAGE AND IN THE CHILLER PANEL LITERATURE PACKET.
Order No: 082533060301
Line No: 1
Product: YLAA
Model: YLAA0101HE46XAA
Volatage: 46
Remote clr: X
Sound encl: X
Unit Shipping Weight
(Display on unit data
nameplate)
kg lbs.
2631 5801
0
Control Panel
0
R1 R2
L1 L2
X
Y
Top View
LD13276