JOHNSON CONTROLS
24
FORM 150.72-NM1 (1020)
Product Description
Coil End Hail Guard
Louvered panel attached to exposed coil end. (Factory-
mounted)
Sound Attenuation
One or both of the following sound attenuation options
are recommended for residential or other similar sound
sensitive locations:
• Compressor Acoustic Sound Blanket - Each
compressor is individually enclosed by an acous-
tic sound blanket. The sound blankets are made
with one layer of acoustical absorbent textile
ber of 5/8” (15mm) thickness; one layer of
anti-vibrating heavy material thickness of 1/8”
(3 mm). Both are closed by two sheets of welded
PVC, reinforced for temperature and UV resis-
tance. (Factory-mounted)
• Ultra Quiet Fans - Lower RPM, 8-pole fan mo-
tors are used with steeper-pitch fans. (Factory-
mounted)
Vibration Isolators
Level adjusting, spring type 1” (25.4mm) or seismic
deection or neoprene pad isolators for mounting under
unit base rails. (Field-mounted)
To Next Page
Loading...