Need help?Do you have a question about the Johnson Outdoors MINN KOTA ULTREX 80 Series and is the answer not in the manual?
General| Thrust | 80 lbs |
|---|---|
| Voltage | 24V |
| Lift Assist | Yes |
| Speed | Variable |
| Spot-Lock | Yes |
| Deployment | Manual |
| Control | Foot Pedal |
| GPS | Yes |
| Steering | Electric |
| Mount Type | Bow Mount |
| Battery Requirement | 2 x 12V Deep Cycle |
| Motor Type | Brush |
| i-Pilot | Yes |
Expresses gratitude for choosing Minn Kota and highlights product quality.
Instructions for registering the trolling motor for warranty and support.
Importance of the 11-character serial number for model identification and service.
Section for recording motor details like model, serial number, and purchase date.
Critical warnings regarding safe operation, propeller hazards, and user responsibilities.
Details the three-year warranty coverage for the entire freshwater trolling motor.
Details the lifetime warranty coverage for the composite shaft.
Outlines specific conditions and actions that void the limited warranty coverage.
Provides instructions on how to obtain warranty service and repair procedures.
Step-by-step guide for attaching the motor assembly to the mounting bracket.
Instructions for mounting the trolling motor onto the bow of the boat.
Procedure for installing the gas spring pin to secure the motor's lift mechanism.
Guides on aligning the motor's steering and control head for proper operation.
Instructions for orienting the pedal control sleeve for starboard side mounting.
Procedure for installing the stabilizer bracket to secure the motor during transport.
Guidelines and steps for securely mounting the foot pedal to the boat deck.
How to identify trolling motor features based on their connected cables and connectors.
Instructions for routing internal connection cables from the control head to the mount.
Description and connection guide for the integrated MEGA Down Imaging sonar feature.
Overview and connection instructions for the Universal Sonar transducer system.
Explanation of the i-Pilot Link system and its connection to the trolling motor and fish finder.
Step-by-step guide to safely disconnect the gas spring from the steering module.
Procedure for detaching the motor assembly from the mounting bracket.
Instructions for reassembling the steering module onto the motor mount.
General guidelines for rigging the boat and installing the motor, following ABYC standards.
Recommendations for choosing deep cycle marine batteries and proper care.
Advice on using alternator chargers and avoiding sonar interference.
Guidelines for connecting accessories to trolling motor battery systems to prevent damage.
Instructions for wiring two 12-volt batteries in series to achieve 24 volts.
Instructions for wiring three 12-volt batteries in series to achieve 36 volts.
Overview of the motor's main parts and their functions for optimal use.
Detailed steps for stowing and deploying the trolling motor safely.
Procedure for adjusting the lower unit for a secure and vibration-free stowage.
Steps to adjust the motor's depth for optimal performance in the water.
Guide for adjusting the length of the pull grip and cable for user preference.
Instructions for installing an external transducer on compatible trolling motors.
Introduction to the foot pedal's controls for motor operation and steering.
Explanation of how to operate the motor using the momentary on button.
Instructions for switching and using the motor in constant operation mode.
How to control the motor's steering direction using the foot pedal.
Method for reversing the motor's direction of travel via the foot pedal.
Description and operation of the Spot-Lock anchoring feature on the foot pedal.
Explanation of the AutoPilot feature and its activation via the foot pedal.
Procedure for adjusting the tension of the steering cables for proper function.
Details on how the steering lock feature maintains the motor's last position.
Step-by-step instructions for safely removing and installing the trolling motor propeller.
Routine cleaning and care instructions to maintain the motor's performance.
Common issues and solutions for motor operation, power, and steering problems.
Information on how to purchase replacement parts directly from the website.
Guidance on accessing frequently asked questions for troubleshooting assistance.
Contact details and hours for phone support for U.S. and Canadian customers.
Information on how to contact customer service via email for product inquiries.
How to find authorized service providers for repairs and parts in the U.S. and Canada.
Statement on the company's commitment to environmental regulations and responsible practices.
Information regarding compliance with the Waste Electrical and Electronic Equipment Directive.
Guidance on proper disposal of the motor and batteries according to local regulations.
Statements on the device's compliance with FCC Part 15 rules for digital devices.
Information regarding the product's compliance with Industry Canada technical specifications.
Specifies the ambient operating temperature, humidity, and altitude limits.
Diagram and list for components of the trolling motor's control head assembly.
Diagram and list for parts specific to the 24-volt, 4-inch motor configuration.
Diagram and list for parts specific to the 36-volt, 4.5-inch motor configuration.
Diagram and list for components of the trolling motor's steering module.
Diagram and list for components of the trolling motor's foot pedal assembly.
Diagram and list for parts related to the trolling motor's mounting system.
Information on Minn Kota's battery chargers for optimal battery care and longevity.
Overview of the Talon shallow water anchor and its features and control options.
List of various trolling motor accessories offered by Minn Kota.
To Next Page