Need help?Do you have a question about the Johnson Pump F4B-19 Series and is the answer not in the manual?
General| Pump Type | Flexible Impeller Pump |
|---|---|
| Series | F4B-19 |
| Body Material | Bronze |
| Impeller Material | Nitrile |
| Port Size | 1.5 inch |
| Voltage | 115/230V |
| Frequency | 50/60 Hz |
| Material | Bronze |
| Inlet/Outlet Size | 1.5 inch NPT |
Details common uses for the pump, such as bilge pumping, fresh water, deck washing, and fuel oil transfer.
Lists specific pump models, voltage options (12V/24V), and corresponding part numbers.
Details the construction materials and features of the pump body, impeller, seal, motor, shaft, and bearings.
Provides advice on mounting position, motor placement, and protection from rain or wash down.
Covers wiring requirements, fuse protection, and ignition protection standards.
Presents data on pressure, flow rate (l/min, USGPM), and amp draw under different conditions.
Specifies wire sizes and maximum lengths for 12V and 24V systems based on voltage drop.
Explains self-priming capabilities, continuous duty limits, and dry running precautions.
Advises against pumping flammable liquids and operating manipulated motors.
Discusses optimal operating temperatures and methods for preventing freezing damage.
Provides step-by-step instructions for taking apart and reassembling the pump.
Recommends annual replacement of the impeller with an original part for security.
Lists optional accessories like vacuum switches and deckwash kits.
Lists pump components with position numbers, names, and corresponding part numbers across multiple languages.
Illustrates the pump with key dimensions, port sizes, and mounting details.
Shows an exploded view of the pump with numbered parts corresponding to the parts list.
To Next Page