18
ner and then lock it by turning it clockwise
until it stops (once reached, you will hear
a click).
- Mount the motor body (A) on the contai-
ner (H) + lid (L) assembly.
Match the “open padlock” mark on the up-
per part of the cover with the small trian-
gle on the motor body.
Insert the latter by pressure and rotate
clockwise.
- Insert the plug in a suitable capacity to
receive it.
- Press the activation button (B or C)
depending on the desired speed.
Avoid continuous operation for times lon-
ger than 30 seconds.
Release the button at intervals to allow the
engine to cool and rest.
If, following continuous activations, the
appliance overheats! Leave it on pause for
10 minutes until it has completely cooled
down.
- After processing, remove the plug from
the socket.
- With the plug disconnected, remove the
container, recover the processed food. Di-
sassemble and clean all components be-
fore putting the appliance away or before
starting a new process, doing pay
particular attention to the cleaning of the
blades: they are sharp and sharp
(possibility of cuts).
- Do not use the chopper accessory to
work very hard foods such as unpeeled
nuts, ice cubes, coffee beans or hard spi-
ces such as nutmeg.
Processing these foods can damage the
blades.
- Never put the chopper in the microwave.
CLEANING
After each use, with the plug unplugged,
clean all parts of the appliance.
Clean the motor body (A) with a slightly
moistened soft cloth.
Do not immerse the motor unit in water or
any other liquid.
The accessories must be washed with wa-
ter and soap, rinsed well and dried careful-
ly, before storing or reusing them.
Do not use solvents, thinners, alcohol or
abrasive sponges.
To Next Page
Loading...