EasyManuals Logo

Johnson Gas 3 User Manual

Johnson Gas 3
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
-Use the appliance only with the accessories sup-
plied, to avoid compromising safe use.
Periodically check the good status of the appliance
and its parts; if in doubt, contact an authorised sup-
port centre.
- Do not use the appliance if it is not working pro-
perly or if it appears to be damaged; if in doubt, con-
tact qualified staff.
- It is strictly forbidden to dismantle or repair the ap-
pliance; if necessary contact the retailer or support
centre.
- The appliance can rest on any support provided it
resists temperatures over 8 C.
- The appliance must be installed far from inflam-
mable material and at a distance of at least 2 cm from
any wall.
Any cabinet over the cooker must be at least 75 cm
from the support surface.
- The location where the cooker is installed must
have sufficient air recirculation and comply with all
safety test cases in force.
Installation: The appliance works on liquid gas and
is planned for installation using a certified flexible
rubber tube in compliance with national standards in
force. Use a flexible tube no longer than 1.5 m.
The flexible tube should be fastened using the tube
tightening ties, certified according to standards in
force, to the two corresponding ends.
Position the full gas cylinder to the rear of the cooker
on the ground. You must buy gas cylinders compliant
with this cooker. The cylinder will need to have the
air bled the first time it is refilled, to guarantee the
cooker will work properly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Johnson Gas 3 and is the answer not in the manual?

Johnson Gas 3 Specifications

General IconGeneral
BrandJohnson
ModelGas 3
CategoryCookers
LanguageEnglish