EasyManuals Logo

Johnson Gas 3 User Manual

Johnson Gas 3
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
each time you replace or fill the cylinder and imme-
diately after first installation of the cooker.
Ensure the knobs are in the OFF position and check
all the connections are correct.
Open the regulator and check with a soapy solution
for any leaks.
DO NOT CHECK FOR GAS LEAKS WHEN the cooker IS
HOT, BUT WAIT FOR IT TO COOL.
DO NOT USE THE COOKER IF LEAKING.
DO NOT USE OPEN FLAMES TO TEST FOR LEAKS.
DO NOT USE ANY ELECTRICAL MATERIAL NEARBY
WHEN YOU SUSPECT A GAS LEAK.
When you suspect a gas leak, immediately close the
tap on the cylinder. Formation of bubbles is an indi-
cation of a leak. If found, close the cylinder valve, di-
sconnect the gas cylinder regulator and remove the
gas cylinder in a cool place, outdoors and well-ven-
tilated. For assistance, contact the retailer or the gas
supplier.
Cleaning and maintenance
Clean the product regularly, when the seasons
change, having cooked, and when it has not been
used for a long time. Wait for the product to cool
down before cleaning it.
Protect your hands to avoid burns.
Product conservation
The gas cylinder must be kept outdoors, in a well-
ventilated area and must be disconnected from the
cooker when it is not used. Ensure you are outside
and far from any ignition source before disconnec-
ting the cylinder from the cooker.
If the product has not been used for long periods of

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Johnson Gas 3 and is the answer not in the manual?

Johnson Gas 3 Specifications

General IconGeneral
BrandJohnson
ModelGas 3
CategoryCookers
LanguageEnglish