EasyManuals Logo

Johnson Happy User Manual

Johnson Happy
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Parts
A. Selector:
off,
ventilation,
heating at 800 W,
heating at 1500 W
B. Thermostat control knob
C. Power indicating light
F. Key for swing selection
D. Integrated handle
E. Device for automatic shut-off
if the heater tips over
SAFETY SYSTEM
The appliance comes with two safety
systems that intervene by automatically
turning off the appliance if it overheats
or tips over.
If the machine is turned off due to over-
heating, disconnect the plug from the
power outlet for a few minutes and turn
selector (A) on (0). After eliminating the
cause of the overheating, reconnect the
appliance to the mains power and reset
the operating conditions.
If the machine is turned off due to tip-
ping over, disconnect the plug from the
power outlet and turn selector (A) on
(0). Reposition the appliance correctly,
reconnect the appliance to the mains
power and reset the operating condi-
tions.
INSTALLATION
Place the appliance on a flat stable sur-
face away from inflammable materials
(curtains, table linen, etc). Place selector
(A) on (0) and insert the plug into a
compatible power outlet.
OPERATION
- Set the thermostat control (B) on the
maximum value.
- Only ventilation: turn selector (A) and
set it on the relative symbol
- Heating:
- operation at low power: set selector
(A) on I (800 W)
- operation at maximum power: set
selector (A) on II (1500 W)
- If you want to let the fan swing,
press key F.
- Shut-off: turn selector (A) on (0).
Turn selector (B) on (0).
THERMOSTAT CONTROL
When the room to heat has reached the
desired temperature, turn the control
knob (B) of the thermostat in a counter
clockwise direction until a click is heard.
The appliance turns off. The action of
the thermostat will automatically keep
the temperature constant.
CLEANING AND MAINTENANCE
Before carrying out any cleaning opera-
tion, always disconnect the plug from
the power outlet.
Keep the air inlet and outlet grills free
and clean.
Only use a non-abrasive cloth to clean
the surfaces, do not use cleaning pow-
ders or solvents.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Johnson Happy and is the answer not in the manual?

Johnson Happy Specifications

General IconGeneral
BrandJohnson
ModelHappy
CategoryHeater
LanguageEnglish

Related product manuals