9
ATTENTION:
Warranty does not cover any plastic parts
of the product
ATTENTION:
If the need should arise to take or send the
appliance to an authorised service centre,
make sure to clean all its parts thoroughly.
For hygienic purposes, the service centre
shall reject appliances that are not perfec-
tly clean on the outside or inside without
making any controls or repairs.
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of elec-
trical and electronic equipment.
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environ-
ment and human health, which could
otherwise be caused by inappropriate
waste handling of this product.
For more detailed information about recy-
cling of this product, please contact your
local city office, your household waste di-
sposal service or the shop where you pur-
chased the product.
Special safety requirements
Never place the motor section (A) in water
or the dishwasher. Clean with a damp cloth.
The jug (B) and cup (C) can be washed in a
dishwasher or by hand.
Take care when handling the blades, espe-
cially when cleaning, because they are very
sharp. Never touch the moving parts.
Do not use boiling water to process the
food or to wash the appliance and acces-
sories.
Use the accessory (C1) provided to press
down the food during processing. NEVER
use your fingers or other utensils. Do not
start the appliance with the jug (B) empty.
Do not use the cup (C) and accessories wi-
thout food inside.
Do not use the cup (B) and jug (C) of the
appliance at the same time.
Do not mix hard or solid ingredients with
liquids.
Do not try to remove food from the jug or
cup when the blades are moving.
For safety reasons, do not have the ap-
pliance serviced by unauthorised people.
Only use the accessories supplied in the
package.
Important: The appliance comes with a
powerful motor that can operate at 600W,
therefore do not keep it running longer
than the time recommended and respect
the pauses between each processing.
ASSEMBLY AND USE
Read the description of the parts and ac-
cessories before assembling and using the
appliance.
A Motor base
A1 Safety lid
A2 Blending ring
A3 Safety button
A4 Hole for inserting the arm (C3)
of the cup lid
A5 Cup shaft (removable)
A6 ON/OFF, speed control and
Pulse selector.
B Jug
B1 Measuring cap for ingredients
B2 Lid
B3 Safety button for lid opening
C Cup
C1 Accessory for pressing down food
C2 Cup lid
C3 Safety arm
G Accessory pin
D Disc (reversible for 2 functions)
D1 Grating blade
D2 Slicing blade
E Metal mincing blade
F Accessory with plastic wings for
mixing, beating and amalgamating
J Spatula
Using the cup (C)
- Remove the jug from the appliance and
position the safety lid (A1) by turning in a
counter clockwise direction until it clicks
into place. Check that it is well fastened to
the motor base (A).
- Make sure the shaft of the cup (A5) is po-
sitioned correctly.
- Position the cup (C) on the motor base (A)
so that the three small blocks around the
shaft are inserted into the lodgings under
the cup.
To Next Page
Loading...