10
Appliance parts
A Weighing surface
B Appliance body
C Display
D1 ON/OFF (switching on, witching
off key, tare function)
D2 Measurement unit button
E Batteries compartment
F Batteries compartment cover
G Removable bowl
H Seat of the bowl
Starting the appliance
Remove the cover F of the battery compar-
tment E.
Insert the 3V battery (CR2032) with the
correct polarity.
Close the cover of the battery compar-
tment E with the cover F.
Using the scales function
Place the appliance on a flat and stable
surface.
Place the bowl (G) on the scale inside the
housing (H) before turning it on.
Press de “ON” (D1) key to turn on the sca-
les.
For some seconds appears “88888” and
then “0 g”. Now place the items to weigh
(max. 5 kg) on the weighing surface A.
The weight in grams appears on the di-
splay. Remove once it is weighed and turn
off the scale by pressing the ON/OFF but-
ton (D1) for a few seconds.
"TARE" or "ZERO" FUNCTION
For consecutive weighings without remo-
ving products from the scale.
Put the first product on the scale and read
its weight.
Press the button (D1), the value of the rea-
ding is reset and on the LCD display "0g"
will appear each time it is pressed (D1).
"0g" at the same time as the icon "ZERO"
or "TARE" on the LCD screen, indicates
that the function is active.
Caution: the maximum capacity remains
unchanged.
Changing the unit of measurement
The device is able to measure with 4 diffe-
rent scales: g, Lb, Oz and Kg
To change the scale, press the button (D2)
until reaching the one you want.
WARNING
also with the tare function the scale will
weigh the additional items until the maxi-
mum total of 3 kg.
Indications on the display
EEEE = overload, the weight exceeds the
maximum capacity.
Battery symbol = the battery needs to be
replaced (located in compartment E on the
back of the appliance).
WARNING
don’t clear the used batteries into the en-
vironment, but the batteries will be put
into a separate container on the refuse
collection .
Cleaning
Clean the appliance body B with a soft
moist cloth; do not use detergents or
abrasives.
SAFETY REQUIREMENTS
This device is only for domestic use and
must be used only for the function was
expressly designed: the weigh food.
- Weigh is not valid for the commerce
- Batteries supplied
To Next Page
Loading...
