21
22
Adjust Calf Support
see images
22
The calf support has 2 positions.
To raise the calf support, push it upwards. A "click" sound
means the calf is locked completely.
To lower calf support, press the adjustment buttons on both
sides of the calf support
22
- 1, and rotate the calf support
downwards.
22
- 2
Use Front Swivel Lock
see images
23
Push up the front swivel locks to maintain the moving direction.
23
Tip
It is recommended to use swivel locks on uneven
surfaces.
Use Brake
see images
24
-
25
To lock wheels, step the brake lever downwards.
24
To release wheels, just lift the brake lever upwards.
25
Tip
Always set the parking brake when stroller is not moving.
Use Canopy
see images
26
The canopy can be opened or folded, pull it toward front or
back.
! To avoid serious injury from falling or sliding out, always
secure your child with harness.
! Make sure your child is snugly secured. The space between
the child and the shoulder harness is about the thickness of
one hand.
! Do not cross the shoulder belts. This will cause pressure on
a child’s neck.
Use Shoulder & Waist Harnesses
see images
18
-
21
! In order to protect your child from falling out, after your child
is placed into the seat, check whether the shoulder and
waist harnesses are at proper height and length.
18
- 1 Shoulder harness anchor A
18
- 2 Shoulder harness anchor B
18
- 3 Slide adjuster
For larger child, use shoulder harness anchor A and the
highest shoulder slots. For smaller child, use shoulder harness
anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the
anchor to be level with the side facing forward. Thread it
through the shoulder harness slot from back to front.
19
Rethread it through the slot that is closest to child's shoulder
height.
20
Use slide adjuster to change the harness length.
21
- 1
Press the button
21
- 2, while pulling the waist harness to
proper length.
21
- 3
To Next Page
Loading...
Need help?
General
