Joie Tilt Instruction Manual

13
14
Rearward-Facing Installation
see images
13
-
24
1
2
13
1
2
14
1. Pull out the vehicle belt and engage the vehicle buckle
tongue into the buckle.
13
13
- 1 Vehicle shoulder belt
13
- 2 Vehicle Waist belt
2. Rotate the child restraint rearward and thread the vehicle
waist belt through the two rear-facing vehicle waist belt slots
underneath the shell.
14
14
- 1 &
14
- 2 Vehicle belt slot
The correctly assembled belt is shown in
15
.
16
15
3. Install the vehicle shoulder belt
in the two rear-facing vehicle
shoulder belt slots at the back
of the seat shell.
16
!
Shoulder belt must pass
through the rear-facing
shoulder belt slots.
4. Take the locking clip out of the
bag.
17
17

Joie Tilt Specifications

General

Group	0+/1
Weight Capacity	0-18 kg
Side Impact Protection	Yes
Harness	5-point harness
Safety Standards	ECE R44/04
Installation	Vehicle seat belt
Rearward Facing	0-18 kg
Forward Facing	9-18 kg
Additional Features	Removable, washable covers
Recline Positions	4 recline positions (1 rearward, 3 forward)