JOLIKE M4 - Device Operation; Powering On and Off; Basic Audio Control; Data Transfer

Switch the Unit On/Off
To switch on: Tap on the button © for 3s.
To switch off: Tap on the button &, the screen shows “SEE YOU” confirming
that your unit is switching off.
Basic Audio Functions
Volume up: Tap on the button +
Volume down: Tap on the button -
Data Transfer
Using the supplied USB cable, connect your computer and copy over media
files as if it was a flash driver or use music management software such as
Windows Media Player to transfer the files (not work for iTunes).
Attention:
If your computer cannot detect the MP3 Player, pls update your USB driver or
try another cable. If it doesn’t help, pls email to jolike@vip.163.com
Back
While the music is being played, Tap on the button §) to exit.
Headphones and Speaker
ONLY Headphones with impedance 16Q or 320 are supported.
Built-in Speaker could be turn OFF, see “Settings”.
Reset
Poke the reset hole with a thin needle or hold the power button for 15s.
03