13
Infrared Motion Sensor:
Your device can be set to activate only
when animals come into range. Set the
mode switch to “Motion Sensor” to select
this feature. When an animal or human
enters the range of the device within 45 ft
(14 m), a red light will go on and the device
will activate both the ultrasonic and sonic.
The range of the sensor may vary due to
ambient temperature
The Motion Sensor is equipped with a dial
that controls its sensitivity. Turn it all the
way up to ensure it works as well as pos-
sible (30). If you nd the device activates
when there are no animals in the yard, turn
it down to about 25
Note: You can test your device to see if it is
working by switching the mode to “Motion
Sensor” and walking or waving your hand
in front. If you see the red light, you will
To Next Page
Loading...