14
6. If any abnormality is found during use of this product, please refer to the following table.
The floor washer
does not work or
alarm is active
1. The roller brush is entangled
with hair or foreign objects
2. Wastewater tank full
3. Battery is low
1. Clean the roller brush after
shutdown
2. Clean the wastewater tank
3. Charge
Product suction is
weakened
1. The roller brush, roller brush
cover and/or wastewater tank is
not properly installed
2. The roller brush is entangled
with hair or foreign objects
3.The suction port or pipe is
blocked
4. The filter above the float is dirty
5. The wastewater tank filter is
dirty or missing
1. Re-install
2. Clean the roller brush
3. Clear obstructions in the
suction port or pipe
4. Use after cleaning the filter
5. Clean or install filter before
use
1. The nozzle opening is blocked
2. Wastewater is full
1. Clear foreign objects in the
suction port
2. Take out wastewater tank
and pour away wastewater
before using
Floor brush does not
spray water
1. Lack of water in the clean water
tank
2. The clean water tank is not
properly installed
1. Refill the clean water tank
2. Reinstall the water tank
Water leakage at the
air outlet
1. Float not installed
2. Wastewater tank filter not dried
after cleaning
1. Install float
2.Wash and dry thoroughly
before use
Water leakage at the
bottom of the floor
brush
Wastewater tank or wastewater
tank filter not installed
Install wastewater tank and
filter
For other failures that cannot be resolved, please contact your local after-sales service
outlet or call the nationwide service hotline.
Maintenance and Repair
EN
To Next Page
Loading...
