JONSBO D32 PRO - Page 9

6
A模式（出厂默认） B模式
概述
兼容普通主板，拥有较大的主板仓空间，适合大多数用
户使用，出厂默认为此模式
兼容背插主板，拥有较大的背部插线空间，适合背插型主
板用户使用
M-ATX标准型主板
可兼容
可兼容
M-ATX背插型主板
不兼容
可兼容
CPU散热器限高
≤170mm (Intel CPU)
≤169mm (AMD CPU)
≤164mm (Intel CPU)
≤163mm (AMD CPU)
内存高度支持
至少51mm，具体取决于内存与水冷散热器相对位置关系 至少45mm，具体取决于内存与水冷散热器相对位置关系
GPU供电线空间
较宽松 视显卡宽度尺寸而定
D32 PRO 结构模式选择说明
注意：需根据硬件规格，提前确认并手动调节机箱结构模式，再进行硬件装配
A Model（Facto Default） B Model
Oveiew
Compatible with common motherboards, with a larger
motherboard compament space, suitable for most
users. This mode is the facto default
Compatible with Micro-ATX (Back-Connect), with a large
back plug-in space, suitable for back-plug motherboard
users
Micro-ATX
(Regular)
Compatible
Compatible
Micro-ATX
(Back-Connect)
Incompatible
Compatible
CPU Cooler Height Limit
≤170mm (Intel CPU)
≤169mm (AMD CPU)
≤164mm (Intel CPU)
≤163mm (AMD CPU)
Memo Height Suppo
At least 51mm, depending on the relative position of
the memo and the water cooling radiator
At least 45mm, depending on the relative position of
the memo and the water cooling radiator
Space For GPU Power
Cables
Less strict Depends on the width of the graphics card
D32 PRO Structure Mode Selection Instructions
Note: You need to conrm and manually adjust the chassis structure mode in advance according to the hardware specications before
assembling the hardware.