English – 35
TECHNICAL DATA
EC-declaration of conformity (Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saw
Jonsered 2095 Turbo from 2002's serial numbers and onwards (the year is clearly stated in plain text on the type plate with
subsequent serial number), is in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
- of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2, CISPR 12:1997, EN608.
Notified body: 0363 Deutsche Prüfstelle fur Land- und Forsttechnik, Weissensteinstr 70/72, DE-34131 Kassel, Germany,
has carried out EC type examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certificate
for EC type examination in accordance with annex VI, has the number: K-EG 228 – 2095 Turbo.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The
certificate has the number: 01/161/033.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna January 3, 2002
Bo Andréasson, Development manager
To Next Page
Loading...
Need help?
General
