Standard harness
Safety release
At the front is an easily accessible, quick release. Use
this in an emergency situation that requires you to free
yourself from the machine and harness quickly.
Spreading the load on your shoulders
A well-adjusted harness and machine makes work
much easier. Adjust the harness for the best working
position. Tension the side straps so that the weight is
evenly distributed across both shoulders.
Correct height
Forestry clearing
The machine should be supported in a harness when
forestry clearing so that the cutting equipment is
angled slightly forwards in relation to the ground.
Adjust the height using the strap on the harness for
the support hook.
Grass clearing
The machine should be supported in a harness when
grass clearing so that the cutting equipment is parallel
to the ground.
Correct balance
Forestry clearing
The machine is balanced by moving the suspension
ring on the machine forwards or backwards. The
machine is correctly balanced when it freely hangs
horizontally from the support hook. In this way the risk
of hitting stones is reduced if you need to release the
handlebar.
Grass clearing
Let the blade balance at a comfortable cutting height,
close to the ground.
To Next Page
Loading...
