Jonsered FR 2216 A 4X4 - Technical Data

36 – English
TECHNICAL DATA
1)
As rated by the engine manufacturer
FR 2216MA 4X4 FR 2216A 4X4 FR 2216A2 4X4
Dimensions
Length without cutting unit, mm/ft 2010/6,58 2010/6,58 2060/6.75
Length with cutting unit, mm/ft 2220/7,29 2220/7,29 2260/7.41
Width without cutting unit, mm/ft 880/2,89 880/2,89 880/2,89
Width with cutting unit, mm/ft 1140/3.74 1230/4.04 1230/4.04
Height, mm/ft 1090/3.58 1090/3.58 1090/3.58
Operating weight with cutting deck, kg/lb 248/546 263/580 296/652
Wheel base, mm/ft 850/2,79 855/2,8 855/2,8
Track width, front, mm/ft 715/2.35 715/2.35 715/2.35
Track width, rear, mm/ft 630/2,06 625/2,05 625/2,05
Tyre dimensions 16 x 7,5 x 8 16 x 7,5 x 8 16 x 7,5 x 8
Air pressure, rear - front, kPa / kp/cm3 / PSI 60 (0,6/8,5) 60 (0,6/8,5) 60 (0,6/8,5)
Max. gradient 10° 10° 10°
Engine
Brand / Model
Briggs & Stratton/
21990070118E1
Briggs & Stratton/
31A6070113E1
Briigs & Stratton/
3057770123E1
Power
1)
, hp 15,5 15,5 16
Displacement, cm
3
/cu.in 502 502 480
Fuel, minimum octane grade lead-free 85 85 85
Fuel tank capacity, litre 10 10 10
Oil synthetic, class SJ-CF SAE 5W/30 or SAE 10W/30 SAE 5W/30 or SAE 10W/30
SAE 5W/30 or SAE
10W/30
Oil tank capacity, litre/USqt 1,4/1,5 1,4/1,5 1,4/1,5
Starting Electric starter Electric starter Electric starter
Electrical system
Type 12 V, negative earthed 12 V, negative earthed 12 V, negative earthed
Battery 12 V, 24 Ah 12 V, 24 Ah 12 V, 24 Ah
Main fuse Flat pin, 15 A. Flat pin, 15 A. Flat pin, 15 A.
Spark plug Champion QC12YC Champion QC12YC
Electrode gap, mm/inch 0,75/0,030 0,75/0,030 0,75/0,030
Noise emissions and cutting width
Sound power level, measured dB(A) 98 98 98
Guaranteed noise level 100 100 100
Cutting width, mm/inch 940/37 1030-1120/41-44 1030-1120/41-44
Vibration levels
Vibration level on the steering wheel, measured
according to EN 836:1997 / A2:2001, m/s
2
<2,5 <2,5 <2,5
Vibration level in the seat, measured according to
EN 836/A2 and ISO 2631-1
<0,5 <0,5 <0,5
Transmission
Brand K 574 KTM 10L K 574 KTM 10L K 574 KTM 10L
Oil, class SF-CC SAE 10W/40 SAE 10W/40 SAE 10W/40
Forward speed, km/h. 0-9 0-9 0-9
Reverse speed, km/h 0-6 0-6 0-6
Cutting unit
Type 3-blade cover Combi 94 Combi-unit Combi-unit
Cutting width, mm/inch 940/37 1030/41 (Combi 103) 1030/41 (Combi 103)
1120/44 (Combi 112) 1120/44 (Combi 112)
Cutting height 40-90/1 9/16-3 9/16 40-90/1 9/16-3 9/16 40-90/1 9/16-3 9/16
Blade length, mm/inch 360/14 3/16” 390/15 3/8 (Combi 103) 390/15 3/8 (Combi 103)
420/16 1/2 (Combi 112) 420/16 1/2 (Combi 112)