Technical data
Technical data
FR 2318 FA 4x4
Dimensions
Length without cutting deck, mm 1960
Width without cutting deck, mm 883
Height, mm 1150
Weight without cutting deck, with empty tanks, kg 236
Wheel base, mm 887
Track width, front, mm 712
Track width, rear, mm 627
Tire dimensions 16 x 7.5-8
Tire pressure, rear – front, kPa / bar / PSI 60 / 0.6 / 8.5
Max. gradient, degrees ° 10
Engine
Brand / Model Briggs & Stratton, Protection Package 4175
Nominal engine output, kW
1
9.1
Displacement, cm
3
500
Max. engine speed, rpm 2900 ± 100
Fuel, min. octane grade 85
Fuel tank volume, litres 7
Oil Class SJ-CF, SAE 5W/30 or SAE10W-30
Oil tank volume, litres 1.4
Start motor Electric start 12V
Transmission
Brand Tuff Torq
Model K574A/KTM10LB
Oil, class SF-CC SAE 10W/50 Synthetic
Electrical system
Type 12V, negative earthed
Battery 12V, 24Ah
Spark plug Champion XC92YC
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
28 807 - 001 - 13.06.2018
To Next Page
Loading...
