English – 37
2
1
6017-225
6017-226
6017-227
8009-438
MAINTENANCE FR 2111 M, FR 2113 MA, FR 2116 MA
8. Lift off the drive belt (1).
Now pull out the split pin (2).
9. Pull the frame forwards and refit the pin.
10. Grasp the mowing deck’s front edge, pull out
and lift up into the service position.
If the cylindrical bolt, which is now holding the
mowing deck is removed, the mowing deck can
be lifted off.
Releasing the service position
To release the service position, reverse the proce-
dures set out in Placing in the service position.
Make sure that the mowing deck’s lug (3) enters the
loop correctly on the underside of the machine, see
diagram.
WARNING!
Exercise care so that your hands
are not crushed.
To Next Page
Loading...
