EasyManua.ls Logo

Jonsered FRH 13 M - Seat and Fuelling

Jonsered FRH 13 M
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 – English
PRESENTATION
!
Fuelling
The engine should be run on at least 92 octane
leaded or unleaded petrol/gasoline (not oil mixed).
Seat
The seat has a jointed attachment on the front
edge and can be tipped forward.
The seat can also be adjusted lengthways.
Release the knobs under the seat and adjust it
forwards or backwards to the required position.
Lock the setting with the knobs.
Lever for adjustment of cutting height
With this lever the cutting height can be adjusted to
9 different positions.
The cutting height of a Mulcher unit is 45-95 mm.
WARNING!
Petrol/gasoline is highly inflammable.
Observe care and fill up with fuel
outdoors (see safety instructions).

Table of Contents

Related product manuals