Jonsered Frontrider FR2315 MA - Blade Replacement and Mulching Plug; Blade Replacement and Mulching Plug Removal

English – 23
Maintenance
Replacing the blades
• Put the unit in the service position, see Service position
for the cutting unit.
• Remove the equipment frame.
• Lock the blade with a wooden block. Loosen the blade bolt
and remove the blade bolt, the washer and the blade.
• Assemble the parts in the reverse order.
• Tightening torque 45-50 Nm (4.5-5 kpm/32-36 lbft).
Removing the Mulching plug
To change a Combi deck from the Mulching function to a
cutting deck with rear ejection, remove the Mulching plug,
which is located under the unit, attached with a screws.
1 Put the unit in the service position, see Service position
for the cutting unit.
2 Loosen the screw holding the plug and remove it.
3 Fit cutting unit.
4 Fit the Mulching plug in the reverse order.
!
WARNING!
Always use genuine parts.
15mm