Jonsered Frontrider FR2315 MA - Technical Data and Specifications; Machine, Engine, and Electrical Specifications

English – 27
TECHNICAL DATA
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power
output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 3: Noise pressure level according to ISO 5395. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.2 dB(A).
Note 4: Vibration level according to ISO 5395. Reported data for vibration level has a typical statistical dispersion (standard
deviation) of 0.2 m/s
2
(steering wheel) and 0.8 m/s
2
(seat).
Note 5: Always use genuine parts.
FR2315 MA
Dimensions
Length with cutting unit, cm/inch 229 / 90,2
Width with cutting unit, cm/inch 99 / 39
Height, cm/in 108 / 42.7
Operating weight with cutting deck, kg/lb 215/474
Wheel base, cm/in 84,5 / 33,3
Tyre dimensions 165/60-8
Air pressure, rear - front, kPa / bar / PSI 60 / 06 / 8.7
Max. gradient 10°
Engine
Brand / Model Briggs & Stratton / 4145
Nominal engine output, kW (see note 1) 9,5
Displacement, cm
3
/cu.in 500 / 30.5
Max.motor speed, r/min 3000 ± 100
Fuel, minimum octane grade lead-free 85
Fuel tank capacity, litre 7
Oil, class SJ-CF SAE 10W/30
Oil tank capacity, litre/USqt 1,4/1,5
Starting Electric starter
Electrical system
Type 12 V, negative earthed
Battery capacity, Ah 21
Spark plug Champion XC92YC
Electrode gap, mm/inch 0,75/0,030
Main fuse Flat pin, 15 A.
Noise emissions and cutting width (see note 2)
Sound power level, measured dB (A) 98
Sound power level, guaranteed dB(A) 99
Cutting width, cm/inch 95 / 37,4
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A) 84
Vibration levels (see note 4)
Vibration level on the steering wheel, m/s
2
1,6
Vibration level in the seat, m/s
2
0,7
Transmission
Brand Tuff Torq T36P
Lubricant
Forward speed, km/h. 0-10
Reverse speed, km/h 0-8
Cutting unit
Type Mulching cutting deck
Cutting heights, 5 positions, mm/inch 25-75 / 1-3
Cutter (see note 5) 2-in-1Cutter JC95 - P/N 580 39 74-01
Blade length, mm/inch 430/17