EasyManua.ls Logo

Jonsered Z54XF - Maintenance Procedures; Scheduled Maintenance Checklist

Jonsered Z54XF
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
= Described in this manual
= Not described in this manual
= Refer to the engine manufacturers manual
1)
First change after 8-10 hours. When
operating with a heavy load or at high ambient
temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning and replacement
are necessary more frequently.
3)
Performed by authorized service workshop.
IMPORTANT INFORMATION The mower
has a 12-volt negative grounded system. The
other vehicle must also be a 12-volt negative
grounded system. Do not use your mower to
start other vehicles.
WARNING! Do not short battery
terminals by allowing a wrench or other objects
to contact both terminals at the same time.
Before connecting battery, remove metal
bracelets, wristwatch bands, rings, etc.
Positive terminal must be connected rst to
prevent sparks from accidental grounding.
MAINTENANCE
DAILY
AT LEAST
ONCE
EACH
YEAR
MAINTENANCE INTERVAL
IN HOURS
BEFORE AFTER 25 50 100 300
CHECK
Throttle cable for adjustment
Mower deck for adjustment
Condition of belts, belt pulleys
Caster wheels (at 200 hour intervals)
Engine valve clearance
3)
CHANGE
Spark plugs
Engine oil
1)
Engine oil lter
Fuel lter
Paper air lter
2)
Air cleaner foam pre-lter
2)
ALSO
Do the 300-hour service
3)
21
MAINTENANCE

Table of Contents

Related product manuals