19
Instruction manual Joolz Aer
+
MAINTENANCE/WASHING
INSTRUCTIONS
Clean the fabric with lukewarm water and soap. Rinse
with fresh water and leave to dry. Never use bleach or
other chemical detergents. Periodically (approximately
once a month) treat the wheels and metal parts with
Teon or silicon spray to ensure the buggy continues
to run smoothly.
The aluminium parts of your Aer+ buggy are coated to
protect it from external inuences such as corrosion.
Coated aluminium parts are vulnerable to acidic
cleaners or grease, which can cause stains and
discoloration of the aluminium parts. We therefore
advise you to clean the aluminum parts of your buggy
with warm water and a soft cloth.
Safety was an important consideration throughout the
development of the Joolz Aer+. Our products therefore
meet the following safety standards:
Europe: EN 1888-2:2018
United States: ASTM F833-21
Australia: AS 2088:2022
Please visit joolz.com, facebook.com/myjoolz or contact
your retailer for any questions and/or comments.
Joolz - Manual - Aer+ - Buggy - AUS-USA-CA - 2023.indd 19Joolz - Manual - Aer+ - Buggy - AUS-USA-CA - 2023.indd 19 23-12-2022 10:1823-12-2022 10:18
To Next Page
Loading...
