21
Instruction manual Joolz Aer
+
aus
MAINTENANCE/WASHING
INSTRUCTIONS
Clean the fabric with lukewarm water and soap. Rinse
with fresh water and leave to dry. Never use bleach or
other chemical detergents. Periodically (approximately
once a month) treat the wheels and metal parts
with Teon or silicon spray to ensure the pushchair
continues to run smoothly.
The aluminium parts of your Aer+ buggy are coated to
protect it from external inuences such as corrosion.
Coated aluminium parts are vulnerable to acidic
cleaners or grease, which can cause stains and
discoloration of the aluminium parts. We therefore
advise you to clean the aluminum parts of your
pushchair with warm water and a soft cloth.
WARRANTY
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure. See page 95 for further
information.
Safety was an important consideration throughout the
development of the Joolz Aer+. Our products therefore
meet the following safety standards:
Europe: EN 1888-2:2018
United States: ASTM F833-21
Australia: AS 2088:2022
Please visit joolz.com, facebook.com/myjoolz or contact
your retailer for any questions and/or comments.
Joolz - Manual - Aer+ - Buggy - AUS-USA-CA - 2023.indd 21Joolz - Manual - Aer+ - Buggy - AUS-USA-CA - 2023.indd 21 23-12-2022 10:1823-12-2022 10:18
To Next Page
Loading...
