Screw the threaded posts into the tops of each Solo
and Mini with the included Allen wrench. Then, select
the braided cables that match the desired height of
your Max and screw them to the threaded posts on
the Solos, as shown in Figure D. Next, locate two
snap links from the door hook kit and connect them
to the braided cables.
STEP 5
Your Joovv Max system includes 4 sets of support
cables with varying lengths that allow for different
heights.
#1 Lead Mode #2 Follow Mode
FIG. D
Hang the door hooks about 9” apart on any
standard-sized door, as shown in Figure E.
STEP 6
Door Mount
(2 people required)
SETTING UP YOUR JOOVV MAX
6.5
To Next Page
Loading...
