Locate two power cords and plug the female ends
into #2 Solo and #4 Mini, plug the opposite end into
a wall outlet, as shown in Figure H. Then, turn on the
power switches on all devices and your Max will
automatically pair.
STEP 9
Follow devices will show “No” on the display until
successfully paired with a lead device. Once paired,
the display will flash “Yes” then will change to “:”.
#1 Lead Mode #2 Follow Mode
#4 Follow Mode#3 Follow Mode
FIG. H
Door Mount
(2 people required)
SETTING UP YOUR JOOVV MAX
6.7
To Next Page
Loading...
