User and Service manual JO960
Ver. 2.0
Ver. 1.1
3
Safety precautions and hazards
General
All those operating, maintaining or working in close proximity to the
equipment must read and understand the safety instructions in this
manual.
• Due to very high voltages the casing must not be
removed or opened during operation.
• Do not under any circumstances touch open wires,
connectors or any other electric conductive parts.
• The main switch must be turned off and the plug
disconnected from the power line socket prior to any
form of maintenance being performed.
• Remark! There will be remaining current approx 10
min after disconnecting the heater.
• Do not touch any object that has been near the heating
tip without ensuring that it has cooled off.
• Always comply with all safety measures when handling
electrical equipment, including any national or interna-
tional regulations
• Immediately disconnect the JO960 if any damage or
malfunction appears. Contact trained service personnel.
• Provide necessary ventilation and avoid inhaling smoke
gases which are formed when heating
To Next Page
Loading...