jotron Phonetech 6200 - Page 2

Jotron AS| Phontech 6200: User handbook 
Page ii
P/N: 87477 (v.B)
List of abbreviations and definitions
The following symbols are used to describe the operating instructions:
S System and/or station status
U The user actions
 Activity in the system or station
CONFIG: This symbol indicates that the functionality is dependant of the configuration
settings and refers to the Phontech 6200 configuration description.
6114: This symbol identifies the functionality only to apply to the unit type within
the frame.
6114: This symbol identifies the functionality to apply to all unit types except the
one within the frame.
61xx: This symbol identifies the functionality to apply to all units in the 61xx range.
ACT
:
On hook / off hook status
Led
:
Light emitting diode – information lamp
P key
:
Programming key
F key
:
Function key
IU
:
Intercom Unit
POTS
:
Plain Old Telephone Service = analogue DTMF telephones
Snom
PTT
:
:
Snom300 IP telephones
Push To Talk
VOL
:
Volume (control)
PABX
:
Private Automatic Branch Exchange