Need help?Do you have a question about the Jovision JVS-ND6604-DZ and is the answer not in the manual?
General| Brand | Jovision |
|---|---|
| Model | JVS-ND6604-DZ |
| Category | Network Hardware |
| Language | English |
Details the manual's purpose, scope, and copyright protection.
Covers FCC caution, RF warnings, and compliance with regulatory standards.
Lists EU directives and standards the product complies with, including CE marking.
Explains licensing terms for open source software used in the product.
Covers default password change, electrical safety, transportation, and installation care.
Details environmental requirements, accessory use, and battery safety.
Step-by-step guide on how to install a Hard Disk Drive (HDD) into the NVR.
Identifies and describes the components and ports on the front and rear panels of the NVR.
Illustrates a typical connection setup for IP cameras, microphones, and monitors to the NVR.
Overview of the NVR's main menu structure and key functional areas like Channel, Record, Alarm.
Details the Task Bar, Right Click Menu, Quick Access Menu, and Main Menu functions.
Instructions for powering on, shutting down, and logging into the NVR system.
Manages IP cameras, channel properties, and network camera detection.
Configures dual stream settings (Main and Sub stream) for video recording and live view.
Adjusts On-Screen Display settings like channel name, time format, and font size.
Configures audio recording, monitoring, coding type, and microphone correction.
Adjusts image properties like style, exposure, rotation, brightness, contrast, and sharpness.
Details image settings like switch sensitivity, brightness, contrast, saturation, and sharpness.
Allows users to cover specific areas of the video feed with a black block.
Controls Pan, Tilt, and Zoom functions of PTZ cameras, including presets and patrols.
Displays IP camera information and logs, and allows management of IP camera users.
Configures recording settings, including default mode and scheduled recording.
Accesses and plays back recorded video footage from the NVR.
Configures motion detection, including defining detection regions and alarm actions.
Sets up actions to be taken when an alarm is triggered, such as duration, buzzer, and email.
Defines time ranges for enabling or disabling motion detection or video alarm events.
Configures alarm actions for when a camera signal is lost or disconnected.
Manages alarm input from IP cameras that support alarm input functions.
Sets the duration of video recording before an event occurs.
Configures and manages NVR alarm input settings for compatible models.
Displays and formats Hard Disk and USB Disk information.
Tools for assessing hard drive current state, HDD self-testing, and performance.
Scans the HDD error real time and displays it in different colors.
Searches and backs up snapshots from NVR HDD to an external storage device.
Backs up recorded videos from NVR to an external storage device.
Configures the NVR's IP address, subnet mask, gateway, and DNS settings.
Provides CloudSEE ID and port for remote access to the surveillance system.
Configures Dynamic Domain Name System settings for external network access.
Sets up email notification settings, including SMTP server and recipient addresses.
Manages basic system settings like CloudSEE ID, language, and display resolution.
Configures NVR date, time, time zone, and synchronization with IP cameras.
Manages NVR user accounts, including adding, editing, and setting permissions.
Allows configuration of the first 4 channels in the main stream view.
Displays product model, CloudSEE ID, S/N, software and hardware versions.
Monitors and manages remote client connections to the NVR.
Allows checking and backing up NVR system logs.
Provides methods for updating the NVR firmware via USB, FTP, or HTTP.
Displays realtime data traffic for Main Stream and Sub Stream of each channel.
Configures intelligent video analytic functions like Intrusion detection.
Detects objects crossing a virtual line and triggers actions based on direction.
Monitors crowd density in a region and triggers alarms if thresholds are exceeded.
Detects fast-moving objects in a virtual region and triggers alarm response actions.
Detects changes in the surveillance environment and triggers alarms.
Counts people entering/leaving an area and generates daily/weekly/monthly reports.
Detects camera tampering or blocking and triggers alarm response actions.
Detects out-of-focus images and triggers record, snapshot, or alarm.
Introduces VMS-6100 client software for managing IP cameras and NVRs.
Methods to add devices to VMS-6100 via IP/Domain, CloudSEE ID, or ONVIF.
Correcting device credentials and accessing live video streams within VMS-6100.
Guides on registering, logging into the CloudSEE Int'l app, and adding devices via ID.
How to view added devices in the list and access their live video streams on the app.
Lists NVR package components and provides a QR code for the CloudSEE Int'l app.
Contact information and instructions for obtaining technical support for the NVR.
To Next Page
