Joy-it NodeMCU ESP32 - Page 5

NodeMCU ESP32
Published: 18.04.2019 Copyright by Joy-IT 5
3. Go to Tools/Board/Boards Manager...
4. Install esp32 by Espressif Systems
The module installaon is now
complete.
You can now choose the
ESP32 Dev Module at Tools/Board
3. MODULE INSTALLATION
Aenon! Aer the inial installaon, the baud rate may have changed to "921600". This may
cause problems. In this case, select the baud rate "115200" to avoid any problems.