Speed Indicator
Unit: MPH, KM/H
Speed signal comes from the motor via controller to the display.
The indicated speed depends on the motor signal and the wheel diameter.
Gear Switch
Short press the MODE button to switch the gear: 1 - slow, 2 - medium, 3 - fast. The higher the gear, the faster the speed. Gear 0
means the motor is not powered.
Lights Control
Long press the MODE key to switch on/off the front and rear lights. Rear lights are also lit automatically when braking.
Cruise Control Function
When riding the scooter, keep the acceleration handle pressed with the same pressure for 5 seconds to activate the cruise control
mode. Use the brake handle to deactivate the cruise control mode.
Start mode selection
For safety purposes all Joyor models except Mbike model are set by default to non-zero start mode which means the motor will
not get started until you start kick the scooter first so that the speed is above zero:
NON - Non-zero start mode
ZERO - zero start mode
To Next Page
Loading...
Need help?
General
