– During the transportation and storage process, the
ambient temperature of the heater should not exceed -
40°C ~ 85°C to prevent damage to electronic components.
– Only authorized customer service stations are allowed
to install and repair heaters, and non-original parts are
prohibited from danger.
– The heater is damaged due to installation and
operation not according to the instruction, and the
manufacturer is not responsible for the warranty.
Must shut-off the heater before refueling
– When performing electric welding on a car, first remove
the positive line of the heater from the battery and ground
it to prevent damage to the controller.
8. Packing List
To Next Page
Loading...