2-4
ENGINE INSTALLATION
13
2-5
MUFFLER INSTALLATION
Adjust the height and position of the
engine as shown so the bottom of the clutch
assembly is flush with the bottom of the
clutch bell. Also check to insure that the
engine and clutch bell are parallel.
*It is highly recommended that you insert
the muffler bolts into the engine case prior
to installing the engine in the frame.
3x15 mm Socket Head Bolt (4)
3x15 mm Socket Head Bolt (4)
Engine Mount/Frame Washers
3 mm Lock Nut (4)
3 mm Lock Nut (4)
Pressure Fuel Line Attachment
Fuel Filter
(not included)
JR .32-.36 Muffler Shown
(JRP960785)
(purchased separately)
To Next Page
Loading...
