3-4 COOLING FAN SHROUD INSTALLATION
Flat Washer, 3mm (4pcs)
Flat Washer, 3mm (4pcs)
TIP: The best alignment of the fan shroud can be achieved
by attaching only the left half of the shroud.
Next, align the mounts so the shroud is centered around the fan.
Tighten the fan mounts then attach the right half of the shroud.
With some engines and Ni-starters, you may need to trim the
glow plug opening in the shroud for additional clearance.
Self-Tapping Screw, 3 x 12mm (4pcs)
Self-Tapping Screw, 2.6 x 8mm (6pcs)
Self-Tapping Screw, 3 x 12mm (4pcs)
Self-Tapping Screw, 2.6 x 8mm (6pcs)
Cooling Fan Shroud (Right)
Cooling Fan Shroud (Left)
Glow Plug Opening
(can be enlarged if necessary)
To Next Page
Loading...
