JR Vibe 90SG - Page 50

50
C) CCPM Activation
MovetherollselectortohighlighttheSWASHTYPfunction,thenpresstherollselectortoaccesstheswashplate
type function. Press the roll selector to access the variations of CCPM mixing, then move the roll selector to select
the desired CCPM type (120 or 140). Move the roll selector to highlight LST and press the roll selector to exit the
system mode.
D) D/R and EXPO Selection
Turnthepowerswitchon,thenpresstheENTkeytoenterfunctionmode.MovetherollselectortohighlighttheD/R
andEXPOfunction,thenpresstherollselectortoenterthefunction.SettheDualRateandExpovaluesasdesired,
below are suggested settings. Press the LST key to return to the menu.