JR Vibe 90SG - Page 58

58
C) Input Select function
PresstheDOWNkeyuntiltheINPUTSELECTfunctionisdisplayed,thensetAUX2toGYROandGEARtoAUX2.Press
the down and select keys together to exit the system menu.
D) D/R and EXPO Selection
Turnthepowerswitchon,thenpresstheDOWNandSELECTkeystogethertoenterthefunctionmode.Pressthe
UPkeytoselecttheD/RandEXPOfunction.SettheDualRateandExpovaluesasdesired,belowaresuggested
settings.