6-8 GYRO/RECEIVER/BATTERY INSTALLATION
Sponge/Foam Rubber
Gyro Amplier
Receiver
Gyro Unit
Double-Sided Servo Tape
Wrap the receiver/gyro
amplier in sponge or
foam rubber to protect
from vibration.
Rx Battery Pack
Double-Sided Servo Tape
Hook and Loop Strap S
helicopter, etc. Also make sure that the front radio bed is free from oil and debris. Clean with rubbing alcohol
to ensure proper adhesion.
Double-sided servo tape and sponge/foam rubber are not included in this kit.
Use the hook and loop straps included in this kit to secure.
Be certain when installing the gyro unit to the front radio bed that it does not come in contact with the frame of the
Hook and Loop Strap L
To Next Page
Loading...
