JR XP8103 - Radio Control Layout

Programming the JR XP8103 Radio For an Electric-Powered, Six-Servo Sailplane
Important Note: The CROW switch could be programmed to work in the opposite way, but this
is not a good idea. It's very easy to accidentally bump the switch down during a hand launch,
which would disable the motor at a very bad time. It's highly recommended that you program
the radio so that the motor operates with the CROW switch down and crow operates with the
CROW switch up.
Programming Procedure
http://www.vvsss.com/xp8103/index.html (3 of 6)2/9/2010 8:31:56 AM