ix
PREFACE
Thank you for purchasing our JAN-470 series equipment.
The JAN-470 series are navigation support equipment for ship with the following
functions.
(1) To draw and zoom in/out an electronic navigation chart (ENC)
(2) Similar operation on an ENC to writing by hand on a paper chart
(3) To create a route while seeing handwritten data
(4) Information can be shared between the ship and land, and the ship's operation
status can be checked on the land side.
(5) Daily work management during port departure/entry
(6) Enable information sharing between ship and shore management center when
emergency occurs
(7) To display weather and sea conditions, to support safe navigation
• For the best operation, read this manual thoroughly before use.
• Keep this manual in a convenient place for future reference. Make use of this
manual when experiencing operation difficulties.
• An LCD panel is used for the monitor of this equipment. Please note that
although the LCD panel is manufactured with very high precision techniques,
some defective pixels may occur. It should be noted that the ratio of the
number of effective dots of the LDC panel is 99.9994% or higher. Use this
equipment as navigation aid to the last.
• Use the created route after checking in ECDIS.
• The contents of this device might be change without notice in the future.
To Next Page
Loading...