JRC J-Marine NeCST - Tool Function

3-62
3.7 Tool Function
The Tool function enables measurement of distance and bearing between points.
Use measured values as a guide for creating a route or handwritten data.
The tool function has the following sub functions:
Function name Description Related section
Divider To measure the distance and bearing of two points 3.7.1 Divider Function
Measure To measure the distance between any points 3.7.2 Measure Function
Circle To place a distance ring at any point 3.7.3 Circle Function
Loupe To display the latitude and longitude of any point 3.7.4 Loupe Function
Ruler To place the ruler on the screen 3.7.5 Ruler Function
Undo/Redo Redoing the last operation 3.7.6 Undo/Redo Function
Use this function to measure the distance and bearing of two points.
The distance and bearing between the two points are displayed while the [Divider] icon is kept
touched.