JRC J-Marine NeCST - Photo Display Function; Uploading a Photo

3-143
3.17 Photo Display Function
This function enables management of taken photos.
In addition, it enables displaying thumbnail images on the chart in conjunction with the position
information added to photos.
Access to “http://192.168.XXX.XXX/necst”.
In “192.168.XXX.XXX”, the IP address of the data processing unit is set.
The default IP of data processing unit is 192.168.100.240
The Image-upload screen is displayed.
The folder list is displayed.
Memo
Operation is also possible from a PC connected to the same Internet environment as the
NeCST. Start Watcher, check the IP address of SAT-LAN and use it.
Example: Open the browser on another PC and enter “http://1.1.1.1/necst” in the address bar.
Enter the IP address set for SAT-LAN in 1.1.1.1.