JRC J-Marine NeCST - Changing the Transparency of Writing to Photo

3-148
Changing the Transparency of Writing to Photo
The transparency of writing to a photo can be changed.
The transparency is shown.
To cancel the change of transparency, tap the [Cancel] button.
Memo
When the line type is set to [Area], Fill Color can be set in addition to Stroke Color.
The color and transparency can be changed for Fill Color similarly to Stroke Color.
Refer to “3.17.4.2 Changing the Color of Writing to Photo” and “3.17.4.3 Changing the
Transparency of Writing to Photo” for details.
The currently set transparency is
shown.
Displays the transparency bar and the range of transparency.