3-2
26 inch touch panel display unit (NWZ-208)
No. Button Function outline
1
When the Power button is pressed while the power of the display unit is turned off,
the power is turned on. To turn off the power of the display unit, press the Power
button for 5 seconds or longer.
2
The screen decreases brightness by pressing the button.
3
The screen increases brightness by pressing the button.
Memo
Adjust the brightness of the screen to the extent it is not dazzling, taking into account the
brightness of the surroundings and to the brightness which you can be easily observed the
ECDIS screens.
Be careful in the nighttime brightness adjustment because nighttime brightness adjustment may
hinder the visibility of information.
To Next Page
Loading...