JRC J-Marine NeCST - Display Processing Unit

3-3
Display Processing Unit (NWM-1470)
No. Name Terminal Function outline
1 USB terminal To connect to a USB memory. Two ports are available.
2 Power Button To turn ON the power of the display processing unit
3 Reset Button If a software error that is difficult to recover occurs, pressing the Reset
Button resets the unit. Resetting may cause damage to files or the OS.
To safely reboot the unit, reboot from Windows or with the Power Button
if possible.
4 Media Drive
-
To read/write data from/to CD/DVD
Note
Pressing the Reset Button may cause damage to files or the OS.
Unless the software is difficult to recover, do not press the Reset Button.
Display Processing Unit (HNS-00010)
Front view of HNS-00010
No.
Name
Terminal
Function outline
1
Power button
To turn ON the power of the display processing unit
(1)
(2)
(3)
(4)
(1)