JRC J-Marine NeCST - Data Processing Unit

3-4
Side view of HNS-00010
No. Name Terminal Function outline
2
USB terminal
To connect to a USB device. Two ports are available.
Connect the LAN adapter, DVD drive.
Data Processing Unit (NJW-1460)
No. Name Terminal Function outline
1 Power Button To turn ON/OFF the power of the data processing unit
To turn ON/OFF the power, short press the button.
2 Reset Button If a software error that is difficult to recover occurs, pressing the Reset
Button resets the unit. Resetting may cause damage to files or the OS.
To safely reboot the unit, reboot from Windows or with the Power Button
if possible.
3 Media Drive
-
To read/write data from/to CD/DVD
Note
Pressing the Reset Button may cause damage to files or the OS.
Unless the software is difficult to recover, do not press the Reset Button.
(1)
(2)
(3)
(2)