JRC J-Marine NeCST - Using Exported Route on ECDIS

3-37
Using Exported Route on ECDIS
The following is an example of using a route exported from the JAN-470 on ECDIS.
[JAN-7201/9201]
Memo
If the JAN-7201/9201 is started before J-Marine NeCST, linking may not work properly.
Restart the JAN-7201/9201.
■If the Soft Version of JAN-7201/9201 is 01.30.110 or later, you can use the following
procedure.
The route will be imported with the name [*R_NeCST].