3 Basic Operation of ECDIS 3-78
3.10.5
Loading a Low Resolution Chart
(ARCS Only)
You can select the low resolution chart.
1) Right-click on the chart, then select [Load Low Resolution] from the context menu.
Then, the low resolution chart is displayed on the screen.
3.10.6
To Select the High Resolution Chart
(ARCS Only)
1) Right-click the cursor on the chart and select the “High Resolution Area” from the context menu
by left-clicking it. Then, the orange square frame with the lens cursor appears. The area
surrounded by the orange frame shows are to be magnified.
2) Move the cursor (orange frame) to specify the area to be magnified and left-click the cursor.
Orange frame
[Magnified chart: High resolution chart]
To Next Page
Loading...
